Lighting Appliances, its The general covering of the conductors must be of a moisture-resistant type. All connections must be made with plugs or plugs mechanically attached to the wires. Wires must be carefully secured in place and protected from heat, oil and physical damage if necessary. Wires must be colored or otherwise coded.
Lighting equipment must be installed in accordance with relevant transport standards and include the following:
•
Headlamps with upper and lower main beam. For quick selection, there must be a control switch that is easily accessible to the driver. Fog lights protecting against flying stones must also be installed in front of the vehicle.
•
Double lights and brake lights.
•
Turn signals, front and rear, with steering column mounted control and visual and audio signal.
•
Must be equipped with a four-way turn signal switch.
•
Spotlight, left and right side of windshield at least 152 mm, manual adjustable type, light beam adjustment controls in truck cab.
•
Sufficient reflectors and marker and traffic lights must be provided to describe the overall length and width of the vehicle.
•
Engine compartment lights, non-reflective, illuminate both sides of the engine with separate switches in the engine compartment.
•
All work areas on the upper floor must be lit.
•
Mounted at the rear of the body, at least one rear light and sound alarm.
•
A flashing red sign or alternating red and white flashes should be installed on the upper deck, which should be 360° horizontally visible. The installation of the beacon should also ensure good visibility. There must be a control switch on the cab dashboard to control the beacon.